System Settings
The Net Chaser Setup consists of eight screens to configure the unit to the
user's preference. Use the Settings button
settings screens.
First System Settings Screen: IPV4 Setup
In the IPV4 setup screen, the Net Chaser's network tests can be configured
to use DHCP or a Static IP addresses. The Net Chaser can also be set to use
a DHCP provided DNS or a fixed DNS IP
• Turn the Net Chaser on by pressing the Power button
• Touch System Settings
• "Use DHCP" is set as default. To enter static IP's touch "Use Static IP"
and enter the following:
• Touch "Set IP" and enter the Net Chaser IP address using the numeric
keypad, then touch OK.
• Touch "Set Subnet Mask" and enter the Subnet Mask IP address using
the numeric keypad, then touch OK.
• Touch "Set Gateway" and enter the Gateway IP address, then touch
OK.
• Use "DHCP DNS" is set as default. To manually enter DNS addresses,
touch "Choose DNS".
• Touch "Set DNS" and use the numeric keypad to enter a preferred DNS
IP address and touch OK.
to navigate through the
.
on the home screen.
12
Second Systems Settings Screen:
Language/Date Format
Language
• Select the desired Language.
Date Format
• Select the desired date format:
• Month/day/year or day/month/year
Third Systems Settings Screen: Display Settings
Length settings:
• Under Display Units, touch either Feet or Meters.
• Under "Standard", touch either T568A or T568B. The touched wiring
standard will be displayed in the cable test wiring diagram.
LCD Screen Brightness:
• To the right of Brightness, touch Set.
• Enter a number between 5 and 100 then touch OK. To cancel, press
the Back button
.
• To continue, touch More Settings or press the Settings button
13
.