Table of Contents
Advertisement
NET PROWLER DESCRIPTION
Back
Enter
Remotes
TRK120
ID Only Coax
Remotes, #1-20
T128C
ID Only Network
Remotes, #1-12
Full-color
LCD display
Soft keys perform the
function on the display
above each button.
Test
Direction cursors to move
in LCD display
On/Off
Micro USB Port
RJ45 jack
F-connector Jack
TRK220
ID Only Network
Remotes, #1-20
T127
ID Only Coax Remotes, #1-8
T138
Cable Tester Smart
Remotes, #1-8
8
LCD SCREEN
The Net Prowler features a full-color graphic LCD screen. Press any of
the four soft keys (blue) below the on-screen icon to select that function.
Alternately, you can use the side or up/down arrows to scroll to your
selected on screen function and press enter (the center arrow).
Types of Faults
Several possible error conditions on the cable are detected and displayed on
screen of your Net Prowler.
Cable Fault
Description
Miswire
Cable's wire connection does not follow TIA568A/TIA568B
cabling standards .
Open
Wire connection is not continuous throughout cable length.
Short
A pair has a high resistance fault. This occurs when the
wires are making contact with each other due to damage
or improper termination.
Split
A cable can be wired with correct continuity but not with
correct pairing. This most often happens when the cable
is terminated consistently at both ends but in the
wrong order.
Length
Displays the pair lengths found. Length discrepancies may be
determined by these results.
Network
Displays network connectivity which allows the user to
Connectivity
determine if it is different than expected.
PoE
Displays results in red if voltages are lower than expected.
9
Advertisement
Table of Contents
