Table of Contents
Advertisement
Network Test
The Network Test menu provides advanced network tests to discover, verify
and troubleshoot the network.
• From the home screen, touch Network Test
• The Net Chaser will automatically establish a link upon entering the
Network Test screen.
Link Test
Upon entering the Link Test screen, the Net Chaser will automatically
perform a port test by acquiring an IP address and DHCP information.
DHCP
• Touch DHCP
from the Network test screen.
• Press the Test button .
• To save the DHCP test results, touch PDF
LCD screen. Enter a file name then touch OK.
.
on the lower right of the
34
Ping Test
• Connect the Net Chaser to an active Ethernet port or cable.
• Touch Ping
from the Network test screen.
• Touch Add
. The saved target list will be displayed.
• Touch add
or Edit
to enter a new IP address or URL.
• Use the keypad to enter an IP or URL
• To edit or remove an address, touch an address under "IP/URL" then
touch Edit
or Delete
• To add an IP address or URL to the target list, touch an address under
IP/URL then touch Add
.
• To ping the Targets, press the Test button
• To stop the ping test, press the Test button
Trace Route
Trace route is an ICMP ping test that shows much more detail than a regular
Ping Test. Choose a target and each device along the route to the target will
be displayed with a corresponding hop number. The largest hop number
will be the destination. If a device does not respond to ICMP dashes will be
shown next to the hop number. Three pings will be sent to each hop and the
response times will be shown.
• From the Network Test screen, touch Trace Route
• To Add/Edit trace route IP addresses, touch List
• To delete an address, touch Delete
• To add an IP address or URL, touch Add
.
.
.
.
.
.
.
35
Advertisement
Table of Contents
