Link Light - Platinum Tools Cable Prowler TCB400 User Manual

Link Light

The Link Light test is used to help identify a hub or switch port.
▪ Power on the Cable Prowler.
▪ Connect the Cable Prowler to an active Network cable or port.
▪ Press the Network/PoE soft key
Light soft key.
▪ The Link Light will automatically begin upon entering the Link Blink
menu.
▪ The Link LED above the LCD screen will flash at the same cadence
as the port light.
▪ Use the up and down arrows to adjust the transmit frequency to suit
the switch characteristics.
then press the Link
15