Maintenance; Batteries; Cleaning; Storage - Platinum Tools Cable Prowler TCB400 User Manual

Batteries

▪ The Cable Prowler is powered by six AA alkaline batteries.
▪ To replace batteries, open the back cover by unscrewing the single
screw with a philips head screwdriver.
▪ Take out the old batteries and replace. Slide the new batteries in by
following the directional guidelines in the battery chamber.
▪ Screw the back cover back on to the Cable Prowler. Do not over
tighten the battery back cover.
Warning: Do not use carbon batteries. Do not mix new batteries with
old batteries, due to the risk of battery leakage.

Cleaning

▪ Use a clean, damp cloth to clean the Cable Prowler.
▪ Before cleaning, disconnect all cables from the Cable Prowler. Failing
to disconnect cables can damage the device and cause personal injury.
▪ Do not use harsh cleaners, abrasives, or solvents.

Storage

▪ When not in use, store the Cable Prowler in a dry, protective case.
▪ Batteries should be removed if the device is stored for a long time.
▪ Do not expose the Cable Prowler to high temperatures or humidity.
See the specifications section for temperature limits.

MAINTENANCE

20