Network / PoE Detection
• Power on the Net Prowler.
• Connect the Net Prowler to a switch or
active network jack.
• Use the left or right arrow
buttons to select the Network/
PoE icon and press the enter
button or press the Network/
PoE soft key
• The Net Prowler will automatically detect and display link capability, connection
speed, PoE class, and PoE Min/Max voltages.
• To perform a Network Test only, press the PoE soft key
• To save the PoE data, press the Save soft key
• Use the arrow buttons and the enter button to name the PoE file.
• Press the Save soft key to save the PoE file.
Link Light
• Power on the Net Prowler.
• Connect the Net Prowler to an active
network cable or port.
• Press the Network/PoE soft key
soft key
• The Link Light will automaticaly begin
upon entering the Link Blink menu.
• The Link LED above the LCD screen will flash at the same cadence as the port
light.
• Use the up and down arrows to adjust the link light cadence.
www.platinumtools.com
.
then press the Link Light
.
.
.
7