Table of Contents
Advertisement
Measurement
Technology
Cable
Measurements
Power over
Ethernet
Active Ethernet
Maximum Voltage
Save Test Results
Tone Generation
Languages
Battery Life
Altitude
Temperature
Humidity
Enclosure
Size
Weight
Safety
Compliances
Warranty
SPECIFICATIONS
Time Domain Reflectometry (TDR)
Cable Testing and ID: up to 1000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)
Length Measurement: 0 to 1,500 ft (457 m), ±
(5%+1ft)
Supports 8 continuity and ID number remotes (RJ-45)
Supports 20 RJ-45 and 20 F-Connector ID only remotes
Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus)
compliant PoE
Tests for classes and loads cable up to 25.5 watts
(at class 4) Identifies Mode A or B (pairs with PoE)
Indicates advertised speeds of 10/100/1000base-t half
or full duplex
Can Link to network at 10/100base-t
Parameters refer to the maximum voltage that can
be applied to any 2 connector pins without causing
damage to the tester.
• RJ Jack: 66 VDC or 55 VAC
• F-connector: 50 VDC or VAC
Stores up to 256 Cable or network tests with user
defined names
Tone Frequencies: 730 Hz and 1440 Hz
English, French, Spanish
For 6 x AA, 9 VDC, 2,200 mA-hr (typical) alkaline
battery:
Operating – 20 hours typical
Standby – 1.5 years typical
(200uA max standby current)
Batteries are included
10,000 ft (3048 m) operating
Operating: 32 to 122°F (0 to 50°C)
Storage: -22 to +140°F (-30 to 60°C)
10 to 90% non-condensing
High-strength PC/ABS plastic with V0 rating with boot
Withstands 4 foot drop on to concrete
1.85"H x 3.6"W x 6.8"L (4.7 x 9.15 x 17.3 cm)
With batteries: 1 lb 2 oz (510 g)
CE
1 Year
21
Advertisement
Table of Contents
