Table of Contents
Advertisement
Screw
STEP 3: Place Lamps in position in firebox. Attach to fireplace with a single screw at the locations shown above for
each unit. Lamps can be placed facing upward or sideways. Replace burner tube and false bottom, along with pilot
shield.
STEP 4: Connect switch wires between lamp wire and
transformer (see schematic). Connect remaining lamp
wire to transformer. Transformer can then be plugged in
and the housing fastened to the bottom of the fireplace.
RECEPTACLE
Glass may be used to cover perforations in false bottom
ULK
TRANSFORMER
ASSEMBLY
Screw
RECEPTACLE
(ALTERNATE LOCATION)
50
Advertisement
Table of Contents
