Table of Contents
Advertisement
Number
Program Name
IMAGE MEM. PRINT
138
(LINE ERROR) SETTING
139
AUTO LISTING SETTING
PRINT STATION # IN
140
RCVD DATA SETTING
PAGE COUNTER PRINT
141
SETTING
142
INDEX PRINT
143
DATE AND TIME SETTING
DAYLIGHT SAVING TIME
144
SETTING
151
RES. PRIORITY SETTING
152
SEND MODE
153
EXPOSURE SETTING
OPTIONAL SETTING LIST
161
PRINT
2. How to use user programs
You cannot change user programs during a fax transmission or recep-
tion.
1) Select fax mode.
If the copier mode indicator is lit, press the COPY/FAX key.
2) Press and hold the light (
The following message is displayed.
USER PROGRAM
ENTER PRG.
3) Enter the desired user program number (3-digit) using the numeric
keys, then press the START key.
The user program number and name are displayed.
Instead of entering the user program number, you can also press
the left arrow key (
) or right arrow key (
program.
Soft SW
setup
Set to control whether to print the first part of the original on the
SW1-7
transaction report when there is an error.
SW19-7 ∼ 8,
SW47-1 ∼ 5,
SW48-1 ∼ 6,
Set to have a listing of fax activity automatically printed at a certain time.
SW49-1 ∼ 5,
SW50-1 ∼ 6
Set to choose where to print the date, your name, and your fax number on
SW30-7
faxes you send.
SW33-1
Set to print page numbers on faxes you send.
SW32-6
Set to print an index mark on the top of received faxes.
No soft SW
Use to set the date and time of the internal clock.
SW46-5
Set the fax machine to automatically make time changes during the year.
Set to select the resolution of transmitted faxes (for example, STANDARD,
SW1-1 ∼ 2
FINE, SUPER FINE, ULTRA FINE).
Set to choose whether direct mode or memory sending mode is the default
SW8-1
in the initial state.
Set to select the exposure of transmitted faxes (for example, LIGHT,
SW3-1 ∼ 5
MEDIUM, DARK).
No soft SW
Set to choose whether to print a list of settings made in user programs.
) key for more than 5 seconds.
#=
) to select the user
Function
Canceling: If you make a mistake entering the user program num-
ber, press the CLEAR key and enter the number again.
4) Follow the instructions that start on the next page for specific infor-
mation about setting user programs.
Canceling: When setting using programs, if you make a mistake
entering a number or time using the numeric keys, open
the rapid key overlay, press the CLEAR key, and enter
the numbers again.
When setting user programs, the current settings and
options are shown on the display panel.
When you want to exit from the middle of a user program, press the
light (
) key.
When changing between screens, use the arrow keys as follows.
Example: P102 DIAL MODE SETTING
Example: P102 DIAL MODE SETTING
DIAL MODE
1:TONE
Press the right
Press the right
arrow key (
arrow key (
DIAL MODE
2:PULSE
5) When you are finished setting user programs, press the light (
key.
7 – 2
DM-FX1
Press the left
Press the left
)
)
arrow key (
arrow key (
Note
)
)
)
Advertisement
Table of Contents
