Sharp DM-FX1 Service Manual page 9

7) Remove the rear cabinet of the machine.
G Remove the document cover. Remove the screw and remove the
rear cabinet.
8) Remove the ground plate.
G Remove the hook, and the screw.
9) Remove the shield plate of the copier.
G Remove the screw.
10) Remove the motherboard.
G Remove the screw and connector.
If an open/close detector
is present, take care not
to break the actuator.
(1)
(2)
(1)
(1)
(3)
(2)
11) Attach the FAX PWB.
G Fix it with (9) M3 screw (gold) packed together with the FAX expan-
sion kit.
12) Attach the motherboard.
G Connect the connector from the machine, insert the connectors, and
fix with M3 screw (gold).
13) Remove the left cabinet from the copier.
G Remove the screw, remove the screw for securing the second and
third mirrors, and then remove the left cabinet.
14) Attach the speaker harness.
G Attach the speaker to the left side cabinet using the
supplied M3 screws (gold color)(8), and then secure the speaker cable
using the harness securing tape included in the FAX expansion kit.
3 – 2
DM-FX1
Securing tape