Table of Contents
Advertisement
Note
f When [SINGLE], [LAMP1], or [LAMP2] is selected, if the lamp turns off or if the runtime exceeds 3 000 hours
set to [NORMAL]), the other lamp turns on. When [DUAL] is selected, if either lamp turns off or if the runtime exceeds 3 000 hours
[LAMP POWER] is set to [NORMAL]), only the other lamp remains on. However, if both lamps turn off or when operation times of both
lamps exceed 3 000 hours
*1
*1 1 000 hours when using the optional Replacement lamp unit (for portrait mode) (Model No.: ET-LAD120P (1 pc), ET-LAD120PW (2 pcs)).
f The colors of the items indicate the status.
Green
Yellow
Red
White
f When the lamp is repeatedly used in a short-time cycle, the life of the lamp shortens.
[LAMP RELAY]
Switch the lamp to be turned on automatically by specifying the day of the week and time.
The degradation of the lamp due to continuous usage can be reduced by automatically switching the lamp to be turned on when using the
projector continuously for a week or more.
1)
Press as to select [LAMP RELAY].
2)
Press qw to switch the item.
[OFF]
[24H]
[1WEEK]
f When [24H] or [1WEEK] is selected, proceed to Step 3).
3)
Press as to select [TIME].
4)
Press the <ENTER> button.
f Enters adjustment mode (the display is blinking).
5)
Press qw to select "hour" or "minute", and press as or the number (<0> - <9>) buttons to set a
time.
f Selecting "hour" allows setting of only the hour in increments of one hour, and selecting "minute" allows setting of only the minute in
increments of one minute between 00 and 59.
6)
Press the <ENTER> button.
f The adjusted time is established.
f When [1WEEK] is selected in Step 2), proceed to Step 7).
7)
Press as to select [DAY OF THE WEEK].
8)
Press qw to switch the item.
[SUNDAY]
[MONDAY]
[TUESDAY]
[WEDNESDAY]
[THURSDAY]
[FRIDAY]
[SATURDAY]
Note
f The [LAMP RELAY] function is enabled when [DUAL] or [SINGLE] is selected in [LAMP SELECT].
f When [DUAL] is selected in [LAMP SELECT], only one lights for four hours from the specified time.
f The operating time will be the local time. (x page 121)
110 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
(when [LAMP POWER] is set to [NORMAL]), the projector turns into standby.
Current setting
Current setting (when there is a lamp that cannot turn on or failed to turn on)
Lamp that has failed to turn on
Any other status
Disables lamp relay.
Switches the lamp daily.
Switches the lamp weekly.
Switches the lamp automatically on the set day of the week.
(when [LAMP POWER] is
*1
(when
*1
Advertisement
Table of Contents
