Table of Contents
Advertisement
Chapter 2 Getting Started — Removing/attaching the projection lens
Attaching the projection lens
Attach the projection lens using the following procedure.
Guide groove
Projection lens
Fig. 1
1)
Remove the Lens Mount Cover, and align the projection lens guide to the guide groove of the
projector and insert to the end. (Fig. 1)
2)
Turn the projection lens clockwise until it clicks. (Fig. 2)
3)
Attach the Lens Mount Cover. (Fig. 3)
f Align the Lens Mount Cover and the projector at dotted line positions in the figure to attach, and turn the Lens Mount Cover clockwise
and fix to the projector.
Attention
f Turn the projection lens counterclockwise to confirm that it does not come out.
48 - ENGLISH
Guide
Fig. 2
(i)
(ii)
Lens Mount Cover
Fig. 3
Advertisement
Table of Contents
