Table of Contents
Advertisement
Note
f Even if [OSD MEMORY] is set to [ON], the cursor position will not be held when the <MAIN POWER> switch of the projector body is turned
<OFF>.
Setting [INPUT GUIDE]
Set whether to display the input guide (input terminal name, signal name, and memory number currently selected) in the position set in the
[OSD POSITION].
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [INPUT GUIDE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [WARNING MESSAGE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
[CLOSED CAPTION SETTING] (NTSC or 480i YC
Set closed captions.
Selecting the closed caption display
1)
Press as to select [CLOSED CAPTION SETTING].
2)
Press the <ENTER> button.
f The [CLOSED CAPTION SETTING] screen is displayed.
3)
Press as to select [CLOSED CAPTION].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
f When [ON] is selected, proceed to Step 5).
5)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Setting the closed caption display
1)
Press as to select [CLOSED CAPTION SETTING].
102 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays the input guide.
Hides the input guide.
Displays the warning message.
Hides the warning message.
Hides closed captions.
Displays closed captions.
C
signal input only)
B
R
Advertisement
Table of Contents
