Page 1
PT-DW830K/DW830W P ro d u c t N u m b e r : PT-DW830LK/DW830LW ™ Projectors P ro d u c t N a m e : As of May 2013. Specifications and appearance are subject to change without notice.
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Specifications Main unit Power supply 120–240 V AC, 10–5.2 A, 50/60 Hz Power consumption 120–240 V AC, 50/60 Hz 1,030 W (1,060 VA) (0.3 W with set to , 3 W with STANDBY MODE set to STANDBY MODE NORMAL DLP™...
Page 3
NOTE: Compatible with non-interlaced signals only. Power cord length 3.0 m (9 ft 10 in) Cabinet materials Molded plastic Dimensions (W × H × D) PT-DW830K/DW830W 498 × 200* × 556 mm (19-19/32 × 7-7/8* × 21-7/8 inches) (with supplied lens) PT-DW830LK/DW830LW 498 ×...
Page 4
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Remote control unit Power supply 3 V DC (AAA type battery × 2) Operation range* Approx. 30 m (98 ft 5 in) when operated from directly in front of the signal receptor Dimensions (W × H × D) 48 ×...
Page 5
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Dimensions unit : mm (inch) NOTE: This illustration is not drawn to scale. The illustration shows the PT-DW830K/DW830W. 442 (13/32) 432 (17) 498 (19/32) Terminals Remote 1 input 3D SYNC Remote 1 output IN/OUT Remote 2 input...
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Standard setting-up position *1 When the lens protrudes to the maximum. 84 mm (3-5/16 in) with the ET-DLE085 ø60.5 43 mm (1-11/16 in) with the supplied lens 44 mm (1-23/32 in) with the ET-DLE150 Upper edge of projected image...
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Projection distance for 16:10 aspect ratio screen Unit: meters Screen size Distance to screen (L) Height from the edge of screen to (diagonal) Zoom Fixed-focus center of lens (H) Zoom Fixed- ET-DLE080 ET-DLE150 Supplied lens ET-DLE250 ET-DLE350...
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Projection distance for 16:9 aspect ratio screen Unit: meters Screen size Distance to screen (L) Height from the edge of screen to (diagonal) Zoom Fixed-focus center of lens (H) Zoom Fixed- ET-DLE085 ET-DLE150 Supplied lens ET-DLE250 ET-DLE350...
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance. Aspect ratio 16:10 ET-DLE085 minimum L (m) = (diagonal screen size in inches) × 0.0183 - 0.0471 maximum L (m) = (diagonal screen size in inches) ×...
Page 10
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Shift range Optical axis shift function allows to shift the position of a projected image as shown below. • Floor mount • Ceiling mount (When the lens except the ET-DLE085 is mounted.) (When the lens except the ET-DLE085 is mounted.)
Page 11
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Installable angle Install the projector at an angle within the range shown below. • Vertical direction • Horizontal direction The projector may be installed at a vertical The projector may be installed at a horizontal angle of 360°.
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors List of compatible signals The signals that can be input to this projector are shown in the table below. Horizontal scanning fre- quencies of 15 kHz to 100 kHz, vertical scanning frequencies of 24 Hz to 120 Hz, and a dot clock of 162 MHz maximum can be input.
Page 14
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors List of compatible 3D signals The 3D signals that can be input to this projector are shown in the table below. Display mode Display Scanning Dot clock HDMI frequency resolution frequency Frame Side by Top and Side by...
Page 15
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Display mode Display Scanning Dot clock RGB1/RGB2 HDMI RGB1 frequency resolution frequency & DVI & (dots)* (MHz) RGB2 (kHz) (kHz) Line Frame Simul- Simul- Side sequen- taneous taneous side* bottom line tial – 750 (720)/60p 1280 × 720 45.0...
Page 16
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, com- mands must be input through communication software, based on the format and satisfying the commu- nication conditions shown below. Pin assignments and signal names...
Page 17
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Cable specifications Control commands Command : Parameter Function Callback P O N PO N Standby power on POWER (STANDBY) P O F PO F Standby power off O S H : 0 OS H: 0 Shutter off...
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Status request commands Command : Parameter Function Callback Description Q P W Main power status Q S H Shutter function status Q I N Input signal status DIGITAL LINK HDMI RGB 1 RGB 2 Video DL 1: HD 1...
Page 19
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Notes on projector placement and operation The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. Never place objects on top of the projector. Make sure there is an unobstructed space of 500 mm (1 feet 8 inches) or more around the projec- tor’s exhaust openings.
PT-DW830K/DW830W/DW830LK/DW830LW ™ Projectors Direction of air intake and exhaust Intake Exhaust Operating the projector continuously If the projector is to be operated continuously for one week, use the dual-lamp optical system's alternat- ing lamp operation (lamp relay) function. The projector cannot be operated continuously one week in dual-lamp mode.