[Lamp Relay]; [Lamp Power] - Panasonic PT-DZ780 Operating Instructions Manual

[LAMP RELAY]

Switch the lamp to be turned on automatically by specifying the day of the week and time.
The degradation of the lamp due to continuous usage can be reduced by automatically switching the lamp to be
turned on when using the projector continuously for a week or more.
1) Press as to select [LAMP RELAY].
2) Press qw to switch the item.
[OFF]
[24H]
[1WEEK]
f When [24H] or [1WEEK] is selected, proceed to Step 3).
3) Press as to select [TIME].
4) Press the <ENTER> button.
f The projector enters adjustment mode (the display is blinking).
5) Press qw to select "hour" or "minute", and press as or the number (<0> - <9>) buttons to set a
time.
f Selecting "hour" allows setting of only the hour in increments of one hour, and selecting "minute" allows
setting of only the minute in increments of one minute between 00 and 59.
6) Press the <ENTER> button.
f The adjusted time is set.
f When [1WEEK] is selected in Step 2), proceed to Step 7).
7) Press as to select [DAY OF THE WEEK].
8) Press qw to switch the item.
[SUNDAY]
[MONDAY]
[TUESDAY]
[WEDNESDAY]
[THURSDAY]
[FRIDAY]
[SATURDAY]
Note
f The [LAMP RELAY] function is enabled when [DUAL] or [SINGLE] is selected in [LAMP SELECT].
f When [DUAL] is selected in [LAMP SELECT], only one lights for four hours from the specified time.
f The operating time will be the local time. (x page 124)

[LAMP POWER]

Switch the brightness of the lamp according to the operating environment of the projector or the purpose.
1) Press as to select [LAMP POWER].
2) Press qw to switch the item.
[NORMAL]
[ECO]
Note
f When [ECO] is set, you can reduce power consumption and operation noise, and extend the life of the lamp.
Chapter 4 Settings — [PROJECTOR SETUP] menu
Disables lamp relay.
Switches the lamp daily.
Switches the lamp weekly.
Switches the lamp automatically on the set day of the week.
Select this item when high luminance is required.
Select this item when high luminance is not required.
ENGLISH - 113