Optional Accessories; Remote 3 (Xlr) Pin Assignments And Signals - Digital Projection THUNDER 10000Dsx User Manual

7. Optional Accessories

Lens TL-08SF LA00111(Short Focal Lens 0.84) : 10kg
TL-1ZH LA00263 (Zoom Lens 1.5 - 2.5:1) : 5.5kg
TL-2Z LA00108 (Zoom Lens 2.5 - 4.0:1) : 4.5kg
TL-4Z LA00109 (Zoom Lens 4.0 - 7.0:1) : 4.5kg
Interface Board SD-SDI BOARD LA00105
HD-SDI BOARD LA00204
Ceiling Mount Kit XL CMKIT LA00264
Switcher ISS-6020 Video/RGB Switcher
A Serial Digital Interface (SDI) board is optionally available.
SD-SDI BOARD
This board accepts the input of non-compressed signal sources such as commercial type digital VTR (e.g., D1/D5-VCR) compatible with digital
serial component signals (of the SMPTE 259M-C standard) and provides a high quality image without quantization noise. Note that the BNC cable
used with the SDI connector should be Belden 8281 cable, or 3C-2V equivalent cable or better.
Packaged items: SDI board (1), shield case (1), connector cable (1), and installation manual (1)
SX HDSDI Board
This board accepts the input of non-compressed signal sources such as commercial type digital VCR (D5-VCR) compatible with digital serial
component signals (of the SMPTE 292M standard) and provides a high quality image without quantization noise. This board accepts the following
image formats.
Number of samples
System
of active 1 line
1920x1035/60/2:1 1920
1920x1080/60/2:1 1920
1920x1080/30/1:1 1920
1920x1080/50/2:1 1920
1920x1080/25/1:1 1920
1920x1080/24/1:1 1920
1920x1080/24(sF) 1920
1280x720/60/1:1 1280
Note that the BNC cable used with the HDSDI connector should be 5C-FB equivalent cable or better.
Packaged items: HDSDI board (1), shield case (1), connector cable (2), flat cable (1), set screw for shield case (2) and installation
manual (1)

REMOTE 3 (XLR) Pin Assignments and Signals

REMOTE3
OUT
2 1
3
NOTE: The wireless remote control can operate even if the plug of the remote cable is inserted into REMOTE 3 (XLR) connectors.
For the wireless remote control not to operate, insert the plug of the remote cable into the REMOTE2 IN jack.
Number of active
Frame rate (Hz)
lines in 1 frame
1035 30
1080 30
1080 30
1080 25
1080 25
1080 24
1080 24
720 60
IN
2
1
3
Sampling
Scanning format
frequency (MHz)
2:1 interlaced 74.25
2:1 interlaced 74.25
Progressive 74.25
2:1 interlaced 74.25
Progressive 74.25
Progressive 74.25
Progressive(sF) 74.25
Progressive 74.25
IN
Pin No. Signal
1 Ground
2 +3.3V
3 DATA IN
E – 44
Total number of Total number of
samples in 1 line (dot) lines in 1 frame
2200 1125
2200 1125
2200 1125
2640 1125
2640 1125
2750 1125
2750 1125
1650 750
OUT
Pin No. Signal
1 Ground
2 No connection
3 DATA OUT