Epson WorkForce WF-100W User Manual page 55

Table of Contents

Advertisement

User's Guide
❏ Do not open the ink cartridge package until you are ready to install it in the printer. The cartridge is vacuum
packed to maintain its reliability. If you leave a cartridge unpacked for a long time before using it, normal
printing may not be possible.
❏ You must remove the yellow tape from the cartridge before installing it; otherwise, print quality may decline or
you may not be able to print. Do not remove or tear the label on the cartridge; this can cause leakage.
❏ Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing.
❏ Install all ink cartridges; otherwise you cannot print.
❏ Do not replace ink cartridges with the power off. Do not move the print head by hand; otherwise, you may
damage the printer.
❏ Do not turn off the printer during ink charging. If the ink charging is incomplete, you may not be able to print.
❏ Do not leave the printer with the ink cartridges removed or do not turn off the printer during cartridge
replacement.Otherwise, ink remaining in the print head nozzles will dry out and you may not be able to print.
❏ Be careful not to let dust or any objects get inside the ink cartridge holder. Anything inside the holder may
adversely affect the printing results or result in an inability to print. If anything gets inside the holder, remove it
carefully.
❏ Insert the ink cartridge in the correct direction. If the cartridge is inserted in the wrong direction, the insertion
area may be damaged and the printer may not be able to print.
Replacing Ink Cartridges and Other Consumables
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workforce wf-100Workforce wf-100 series

Table of Contents