Advertisement
PC Interface
The OS4000 series comes with a Windows
software runs on Windows Vista, XP, and 2000. The software allows the user to
do the following:
• Establish communication with the OS4001 and display the temperature in real
time both digitally and graphically.
• Select sound, COM port, and temperature engineering unit
• Change the response time, and high & low alarm set points
• Select chart scale either manual or automatic, and chart time base
• Display the temperature vs. time along with high & low alarm lines
• Save the log temperature data to a file
Figure 15 shows the Main screen when the program is open. Figure 16 (page 4-2)
shows the Settings menu screen. The following is a description of the two
menus:
1 – An analog Gage showing the temperature in real time.
2 – The portion of the gage (Highlighted Red) representing the high alarm zone.
3 – The portion of the gage (Highlighted Red) representing the low alarm zone.
4 – A digital display of the current temperature.
5 – A line graph of the temperature vs. time along with the high & low alarm
1
3
4
5
lines. The Chart time base is set for 1 Minute/Frame or 10 seconds/Div. as
based PC interface software. The
®
2
Figure 15. Main Menu Screen
4
PC Interface
6
8
7
4-1
Advertisement
