Advertisement
2
Installation - Laser Sighting
Installation - Laser Sighting
Figure 1 shows the general dimensions of the fiber optic lens probe & cable.
Figure 2 shows the general dimensions of the lens probe mounting bracket (L1-MB).
Figure 3 shows the general dimensions of the lens probe air purge collar (L1-AP).
Figure 4 shows the general dimensions of the mounting bracket for the transmitter.
Figure 5 shows the general dimensions of the mounting nut for the transmitter.
Figure 6 shows the general dimensions & wiring connections for the transmitter.
Figure 7 shows the Front Plate of the transmitter with Laser warning certification
label.
Figure 8 shows the Fiber Cable connection (keyed) to the transmitter
Figure 9 shows the Back Plate of the transmitter with all the controls and LED
indications.
Figure 10 shows the general dimensions of the water cool jacket accessory for the
transmitter (OS4000-WC).
Figure 11 shows the general dimensions of the Vacuum Bushing (OS4000-VB).
The vacuum bushing allows transitioning the fiber optic cable from vacuum
environment to the atmosphere environment. Normally, the lens probe is located
in the vacuum and the transmitter in the atmosphere environment.
FIBER OPTIC CABLE
FC CONNECTOR
2-1
FIBER OPTIC CABLE LENGTH
0.91 m, 1.83 m, 3.05 m LONG
(3, 6, or 10 FEET)
LABEL
6.86 (0.27) MAX.
STAINLESS STEEL
INTERLOCK
Figure 1. General Dimensions, Fiber Optic Lens Probe Assembly
LENS PROBE
HOLDING SCREWS
INSERT FIBER
OPTIC LENS PROBE
3.18
(0.125)
25.4
9.53
(1.00)
(0.375)
ø 0.150
4 PLCS
30.48
(1.20)
3.81
44.45
(0.15)
(1.75)
Figure 2. General Dimensions, Lens Probe Mounting Bracket (L1-MB)
184.15 (7.25) Max.
19.05 (0.75)
LENS PROBE
25.4
(1.00)
ø 31.75
(1.25)
111.11 (4.375)
ø 25.4
(1.0)
DIMENSIONS mm (in)
ø = DIAMETER
ø 25.91
50.8
(1.02)
(2.00)
38.1
(1.50)
DIMENSIONS mm (in)
ø = DIAMETER
Advertisement
