Initialization Ot The Environment Setting Of The Cassette - Panasonic AF7CPS Series User Manual

4.2.6 Initialization ot the environment setting of the cassette

 The Ethernet communication environment setting of the AFP7CCET1 can be initialized.
PROCEDURE
1. Turn on the SW1 at the back of the AFP7CCET1.
2. Install the AFP7CCET1 on the FP7 CPU unit and turn on the power supply.
3. Start "Configrator WD".
4. Press [Search Unit] icon in the Configrator.
If FP7CCET1 is detected, it has sucessfully initialized.
5. Turn off the power supply of the FP7 CPU unit. Remove the AFP7CCET1.
6. Turn off the SW1 at the back of the AFP7CCET1.
7. Install the AFP7CCET1 on the FP7 CPU unit.
KEY POINTS

The Ethernet communication setting (including the IP address) cannot be
changed when the SW1 of the AFP7CCET1 is on. Always turn it off after
initialization.
4.2 Specified using Configurator WD
4-11