Disassembly Of Rotary Motor; Disassembly Of Temperature Sensor - KKT KOLBE EU Series Service Manual

6.10 Disassembly of rotary motor

Step1: Disassemble the control panel cover and control panel back cover (please refer to
Point 6.4.1 step 1).
Step 2: Disassemble the back cover (please refer to Point 6.5).
Step3: Disconnect wires on the rotary motor. For the sake of reassembly convenience,
please mark the connection positions before moving the wires. Remove the screws
connected the motor and insulation cover, and then disassemble the motor.

6.11 Disassembly of temperature sensor

(Model: EB8013ED, EB8015ED, EB8015W, EB8016ED)
(Model: 65DAE\65EAE\65DTE)
Step1: Disassemble the control panel cover and control panel back cover (please refer to
Point 6.4.1 step 1).
Step 2: Disassemble the back cover (please refer to Point 6.5).
Step 3: Disconnect wires connected the temperature sensor and the power board. For the
sake of reassembly convenience, please mark the connection positions before moving the
wires. Rotate the temperature sensor, and take it out from the lock position.
27
22