KKT KOLBE EU Series Service Manual page 7

5. Installation
5.1 Preparation before installation
1 Assembly shall be refered to the measurements in the following specification after the
package is removed. (The packing material shall be handled properly.)
2 Please use the handle boxes on the sides if the oven is required to be lifted or moved.
prohibited from using door handle directly to lift the oven.
3 All inflammable, combustible and non-heat resistant articles shall be kept away from the
surrounding of the oven.
4 The ground shall be maintained flat enough for placing the oven to ensure sufficient
stability of the product.
5.2 Install the oven to the cabinet
Step 1: Fit the oven into the cabinet recess.
Step 2: Open the oven door and remove the rubber cap of two screws, which on the front
sides of oven frame.
Step 3: Secure the oven to the kitchen cabinet with two plastic holders "A" which fit the holes
in the oven frame and two screws "B". (See the following figure)
Step 4: After fit the oven into cabinet, assemble the rubber cap back.
(See the following figure).
12
7
It is