Fitting And Removal Of Base : Prolite X2481Hs - Iiyama ProLite XB2481HS-B1 User Manual

FITTING AND REMOVAL OF BASE : ProLite X2481HS

CAUTION  Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Installation>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor flat on a table with front face down.
Hold the monitor and install the Stand-Neck to the
monitor until it clicks to secure.
Install the Stand-Base to the Stand-Neck.
Place the Cable Holder.
<Removal>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor flat on a table with front face down.
Keep pressing the Hooks inward to pull out the
Stand-Base.
There are two locks inside of the Stand-Neck,
unlock them by thin stick and pull the Stand-Neck
away from the monitor.
8 BEFORE YOU OPERATE THE MONITOR
Cable Holder
Thin stick
Stand-Neck
Stand-Base
Hooks