Table of Contents
Advertisement
FITTING AND REMOVAL OF BASE :
ProLite E1902S / E1902WS / E1902WSV
CAUTION
Install the stand on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before installation to avoid electric shock or damage.
<Install>
Hold the monitor and push the post down
into the stand.
<Remove>
Press the stopper at the back of the stand
and remove the stand from the post.
Stand
Press the stopper
BEFORE YOU OPERATE THE MONITOR
6
Advertisement
Table of Contents
