FITTING AND REMOVAL OF BASE : ProLite E2008HDS / ProLite E2008HDD
Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor fl at on a table with front face down.
The Stand-Bottom is pulled up as shown in the fi gure.
Install the Stand-Base to the Stand-Bottom.
<Remove>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor fl at on a table with front face down.
Hold down the hooks inside and pull the Stand-Base away from the Stand-Bottom.
BEFORE YOU OPERATE THE MONITOR 5