Fitting And Removal Of Base : Prolite Xub2792Hsu - Iiyama ProLite XUB2792HSU-B1 User Manual

FITTING AND REMOVAL OF BASE : ProLite XUB2792HSU

 Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Hold the monitor and install the Stand-Base.
Use the 'thumb screws' provided to secure the base to the monitor.
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Remove the 'thumb screws' to remove the base from the monitor.
<Stopper>
Put the monitor on a flat surface. Press the stopper at
the back of the stand while pushing the monitor from the
top. Careful attention is required as the monitor is sprung
loaded and the stand may expand quickly.
Stand-Base
Thumb screws for Stand-Base fixing
BEFORE YOU OPERATE THE MONITOR 7
Stopper