How To Change The Water Level - LG FH069FDFS Owner's Manual

22. How to change the water level

You can change the water level by selecting options.
1. indicate water level 23,8 [KHz] (cold course : 23,8 KHz)
2. indicate water lever 23,3 [KHz] (cold course : 23,5 KHz)
3. indicate water lever 23,0 [KHz] (cold course : 23,0 KHz)
Entering set up
mode.
You will see LqC1
NOTE
• This function is only controlled in machine. (It is not applied in setup card.)
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button. Display
(167°F) or 60°C (140°F) button to select course.
: 90°C (194°F) course
: 75°C (167°F) course
: 60°C (140°F) course
: 30°C (86°F), 40°C (104°F) course
: Cold course
Press the Start button.
Press 75°C (167°F)(+) or 60°C (140°F)(-) button and then
select , ,
23,8 KHz
23,3 KHz (default)
23,0 KHz
Press the Start button.
The machine sets up the value of water level, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the 90°C (194°F) button twice.
PROGRAMMING MODE - SETUP MODE
Button
. Press 75°C
55
Display
One or the other
will display.