Cycle Kill - LG FH069FDFS Owner's Manual

69
PROGRAMMING MODE - TEST MODE

5. Cycle Kill

Coin / OPL type
Button Display
Entering set up
mode.
Press the 75°C (167°F) or the 60°C (140°F) button until
You will see LqC1
appears in the display.
Press the Start button.
Press the 75°C (167°F) button until appears in
the display.
Press the Start button.
Start drain.
Display with beeping.
Go back to ready mode.
NOTE
• You can kill the cycle in the middle of cycle by using KILL function.