How To Change The Water Level - LG F1069FD2P Owner's Manual

54 54
PROGRAMMING MODE - SETUP MODE PROGRAMMING MODE - SETUP MODE

22. how to change the water level

You can change the water level by selecting two options.
1. indicate water level 23.8 [KHz]
2. indicate water level 23.5 [KHz]
3. indicate water level 23.0 [KHz]
Entering setup
mode.
You will see LqC1
NOTE
• This function can be set only at the machine. It cannot be managed via the setup card.
(It is not applied in setup card.)
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press Warm(+) or Cold(-) button and then select
or or
23.8 [KHz]
Press the Start button.
The machine sets up the value of water level, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type – Turn on/off toggle switch.
• Card type – Insert the service card.
• OPL type – Push the Hot button twice.
Button
23.5 [KHz] 23.0 [KHz]
Display
appears
appears
One or the other
will display.