Non-Stop Rinse - LG FH069FDFS Owner's Manual

36
PROGRAMMING MODE - SETUP MODE

9-2. Non-stop rinse

Non-stop rinse setup can be used to enable/disable simultaneous rinse & spin.
Entering set up
mode.
You will see LqC1
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Display .
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press 75°C (167°F) or 60°C (140°F) button and then
select or
Disable
Enable
Press the Start button.
The machine sets up the non-stop rinse, then advances
to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the 90°C (194°F) button three times.
Button
.
Display
One or the other will
display.