Operating Your Washer - LG FH069FDFS Owner's Manual

22

OPERATING YOUR WASHER

OPERATING YOUR WASHER
1. Ready mode
1) Coin / Card type
– The cycle LEDs are lit at the same time,
when the price of cycles are equal.
2) OPL type
– The cycle LEDs flash at the same time,
and displayed 'PUSH'.
NOTE
• Price setting varies by country.
• Set your country from
(Refer How to enter the
• After EEPT, reset your country. (Default
country is EUK)
2. Insert card/coin (not for OPL type)
Insert a cash card that has a sufficient balance.
The card balance should be more than the
programmed vend price for a selected cycle.
NOTE
• When the card balance is not enough,
machine displays the card balance for 5
seconds and then displays
message repetitively
• Insert a sufficient amount of change that
is more than the programmed vend price
for the selected cycle.
NOTE
• The machine will not start until sufficient
coins are inserted.
3. Select the cycle
• Select cycles designed for different types of
mode.
)
4. Custom PGM
5. Change course
6 . Cycle finish
❋ Do not work any button and stop the washer
Press the desired button and press the
start button.
The display LED will show the remaining
time and the selected cycle starts.
fabric and soil levels.
CYCLE
90°C (194°F)
75°C (167°F)
60°C (140°F)
40°C (104°F)
30°C (86°F)
Cold
Press and hold 'Cold' button for 3 seconds.
You can use courses you have created.
(Only OPL Type)
You cannot change the course while the
machine is running.
The machine stops and LED display shows
" " with beeper sound.
(When the washer is operating) or (when a
cycle is in progress)
WARNING
• To reduce the risk of fire, electric shock, or
injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating
this appliance.
Wash/Rinse Temp.
Extra Hot/Cold
Extra Hot/Cold
Hot/Cold
Warm/Cold
Warm/Cold
Cold/Cold