Value Of Coin - LG FH069FDFS Owner's Manual

20. Value of coin 2

Value of coin 2 can be used to set the incremental coin value for kiosk systems.
Entering set up
mode.
You will see LqC1
NOTE
• Coin 2 is available for kiosk system
• This function is not applied for opl type.
• Price setting varies by country.
• Set your country from
• After EEPT, reset your country. (Default country is EUK)
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Display previous coin 2 value.
Press 75°C (167°F)(+) or 60°C (140°F)(-) button to select
value of coin 2.
(The value can be set 0~1000 in 10 increments.)
Press the Start button.
The machine sets up the value of coin 2, then advances
to the next process automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C
(140°F) button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the 90°C (194°F) button twice.
mode. (Refer How to enter the
PROGRAMMING MODE - SETUP MODE
Button Display
)
53