Table of Contents
Advertisement
52
PROGRAMMING MODE - SETUP MODE
20. value of coin 1
Enter setup mode.
You will see LqC1
NOTE
• Price setting varies by country
• Set your country from
• After EEPT, reset your country (Default country is EUK)
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display previous coin 1 value.
Press Warm(+) or Cold(-) button to select value of coin 1
(The value can be set from 0~1000 in 10 increments.)
Press the Start button.
The machine sets up the value of coin 1, then advances
to the next process automatically.
1. Continue to set up the next price.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types – Push the Hot button twice.
mode (Refer How to enter the
Button
Display
appears
appears
)
Advertisement
Table of Contents
