Operating The Washer - LG WT5101HV Owner's Manual

H O W TO U S E

OPERATING THE WASHER

wWARNING:
this appliance, follow basic precautions, including the following.
Once you have loaded the washer and added laundry products (detergent, bleach, and/or fabric softener):
NOTE: When the wash cycle is finished, the beeper (if set) will sound and the lid will unlock.
To prevent wrinkling, remove items from the washer immediately after the end of the cycle.
NOTE: WAVEFORCE™ is available for 8 lb. or larger loads in the COTTON/NORMAL or HEAVY DUTY cycles.
14
To reduce the risk of fire, electric shock, or personal injury when using
SORT LAUNDRY AND LOAD WASHER.
1
Refer to page 16.
ADD DETERGENT.
2
Refer to pages 17-18.
TURN ON THE WASHER.
3
Press the POWER button to turn on the washer.
The lights around the cycle selector knob will
illuminate.
SELECT CYCLE.
4
Turn the cycle selector knob to the desired cycle.
The display will show the preset WASH/RINSE
temperature, SOIL LEVEL, SPIN SPEED for that
cycle.
SELECT CYCLE MODIFIER BUTTONS.
5
If you would like to change the modifier for that
cycle, press the appropriate cycle settings button(s)
until the indicator light for the desired setting is lit.
NOTE: To protect your garments, not every WASH/
RINSE temperature, SPIN SPEED, SOIL LEVEL, or
OPTION is available with every cycle.
SELECT OPTION BUTTONS.
6
Select any additional cycle options, such as
FABRIC SOFTENER or DELAY WASH.
NOTE: To protect your garments, not every WASH/
RINSE temperature, SPIN SPEED, SOIL LEVEL, or
OPTION is available with every cycle.
BEGIN CYCLE.
7
Press the START/PAUSE button to begin the cycle.
The lid will latch, the display will change, and the
washer will calculate the estimated time remaining.
Once the washer has calculated the estimated total
cycle time, the washer will start. To pause the cycle
at any time, press PAUSE.
To resume the cycle press START/PAUSE again.