Panduit LS8E-KIT Operator's Manual page 47

PANTHERLINK
7. Open PanTherLink software on your computer.
8. Select Download a Symbol to the LS8E printer from the toolbar. The icon
shows "BMP" with an arrow pointing away from a computer.
9. Browse to locate your .BMP file on your computer. Highlight the file and click
Open.
10. Select the file storage location on the printer to send the .BMP file to.
11. Click OK.
12. The file transfer progress bar will appear.
13. Once the Symbol file transfer successful message appears on your computer,
click OK.
14. The file menu tree on the left side of the PanTherLink screen will update
automatically. All blank file locations on your printer are named Blank_.bmp.
All file locations on your printer with custom symbols saved in them are
named Btmap_.bmp. After a custom symbol has been saved on your printer
and if you are in the PC interface, symbol transfer mode, within PanTherLink
software you can click the file location to see a graphic representation of the
symbol.
15. Press DEL twice on the LS8E printer to end the PanTherLink session and
return to the SETUP menu.
16. Press SETUP to return to the home screen.
17. To insert the custom symbol file into a label, press INSERT and select
SYMBOL
18. Scroll right or left to select the file to insert. The custom graphic files are
stored in locations 83-92.
19. Press .
20. The Symbol tool icon will appear on the LS8E home screen.
21. Press PRINT.
Downloadable Symbols (.BMP) File Transfer Screens
47