Switching To Continuous Paper - Epson C11CF39402A0 User Manual

Note:
❏ If continuous labels are loaded in the printer, remove them before switching to single-sheet printing.
See "Tear off and eject labels" on page 51 for more information.
❏ If the tractor is in the pull position, remove any continuous paper from it before switching to
single-sheet printing. See "Removing paper from the pull tractor" on page 38 for more information.
1. If any printed pages remain in the printer, press the Tear Off/Bin button to advance the paper to
the tear-off position. Then tear off the printed pages.
Caution:
!
Make sure you tear off your printed document before you press the Load/Eject button in the
next step. Reverse feeding several pages at a time may cause a paper jam.
2. Press the Load/Eject button to feed the continuous paper backward to the standby position. The
paper is still attached to the push tractor but is no longer in the paper path.
3. Move the sheet guide to the upright position.
4. Set the paper release lever to the single-sheet position.
5. Load single sheets as described in "Loading Single Sheets" on page 44.

Switching to continuous paper

Follow these steps to switch from single sheets to continuous paper with a push tractor:
1. If a single sheet remains in the printer, press the Load/Eject button to eject it.
Caution:
!
Never use the knob to eject paper; this may damage the printer or cause it to lose the
top-of-form position.
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User's Guide
Paper Handling 54