Transporting The Printer - Epson C11CF39402A0 User Manual

1. Remove any paper loaded in the printer, and turn off the printer.
2. Remove the sheet guide. If an optional cut-sheet feeder is installed, remove it.
3. Use a soft brush to carefully brush away all dust and dirt from the outer case and sheet guide.
4. If the outer case and the sheet guide are still dirty or dusty, clean them with a soft, clean cloth
dampened with mild detergent dissolved in water. Keep the printer cover and front cover closed to
prevent water from getting inside the printer.
Caution:
!
❏ Never use alcohol or thinners to clean the printer; these chemicals can damage the printer
components as well as the case.
❏ Be careful not to get water on the printer mechanism or electronic components.
❏ Do not use a hard or abrasive brush.
Do not spray the inside of the printer with lubricants; unsuitable oils can damage the printer
mechanism. Contact your Epson dealer if you think lubrication is needed.

Transporting the Printer

If you need to transport your printer for some distance, carefully repack it using the original box and
packing materials.
Follow these steps to repack the printer in its original packing materials:
Warning:
!
You need to move the print head by hand to remove the ribbon cartridge. If you have just used the
printer, the print head may be hot; let it cool for a few minutes before touching it.
1. Remove any paper loaded in the printer. Make sure the printer is turned off.
2. Unplug the power cord from the electrical outlet; then disconnect the interface cable from the
printer. If an optional cut-sheet feeder is installed, remove it.
3. Remove the sheet guide. If any options are installed, remove them and pack them in their original
boxes.
4. Make sure the print head is not hot. Then remove the ribbon cartridge as described in "Replacing
the ribbon cartridge" on page 120.
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User's Guide
Product Information 158