Midea MFH180-G1302DS F01E-US Technical Service Manual page 48

Door Hinge
To remove the door hinge:
1. Remove the door. (See
2. Remove the 7 Phillips-head screws that hold
the door hinge to the front panel.
.)
Door
Tub Gasket (Boot)
The tub gasket provides a watertight seal between
the front and the outer tub. The front of the tub
gasket is secured to the front panel fl ange by a
spring and wire located in the fold of the gasket. The
back of the tub gasket is attached to the outer tub
lip with a wire and bolt assembly.
To remove the tub gasket:
1. Remove the front panel. (See
2. Pull down and disengage the gasket from the
nozzle.
Nozzle
Gasket
– 51 –
.)
Front Panel
(Continued Next Page)