Midea MFH180-G1302DS F01E-US Technical Service Manual page 15

LOADING THE WASHER
Wash drum may be fully loaded with loosely added items. Do not wash fabrics containing flammable
materials (waxes, cleaning fluids, etc.).
To add items after washer has started, press Pause/Add a Garment and wait until the door is unlatched.
The washer may take up to 30 seconds to unlock the door after pressing Pause/Add a Garment
depending on the machine conditions. Do not try to force open the door when it is locked. After the door
unlocks, open gently. Add items, close the door and press Pause/Add a Garment to restart.
WASHER CARE
CLEANING
EXTERIOR
Immediately wipe off any spills. Wipe with damp cloth. Do not hit surface with sharp objects.
INTERIOR
To clean the interior of the washer, select the Tub Clean feature on the control panel. This Tub Clean
cycle should be performed, at a minimum, once per month. This cycle will use more water, in addition
to bleach, to control the rate at which soils and detergents may accumulate in your washer.
NOTE: Read the instructions below completely before starting the Tub Clean cycle.
Remove any garments or objects from the washer and ensure the
1.
washer basket is empty.
Open the washer door and pour one cup or 250 ml of liquid bleach or
2.
other washing machine cleaner into the basket.
Close the door and select the Tub Clean cycle. Push the Pause/Add a Garment button.
3.
When the Tub Clean cycle is working, the display will show the
4.
estimated cycle time remaining. The cycle will complete in about 90 minutes. Do not
interrupt the cycle.
- 15 -