Table of Contents
Advertisement
Prewash is an extra wash before the
main wash. Use it for heavily soiled
PRE WASH
clothes or for clothes with a care label
that recommends prewashing before
washing. Be sure to add liquid or
powder high-efficiency detergent, or
the proper wash additive to the
prewash dispenser.
You can lock the controls to prevent
any selections from being made. Or
EXTRA
you can lock or unlock the controls
RINSE and
after you have started a cycle.
PRE WASH
Children cannot accidentally start
the washer by touching buttons
with this option selected.
To save a favorite cycle, set the
desired setting for wash cycle, soil
MY CYCLE
level, spin speed and wash temp
settings and hold down the My Cycle
button for 3 seconds, A beep will
sound to indicate the cycle has been
saved.
To use your custom cycle, press the
My Cycle button before washing a
load.
hold down the My Cycle button for
3 seconds.
To change the saved cycle, set the
desired setting and
PreWash must be selected prior to
pressing Pause/Add a Garment. The
PreWash feature will fill the washer with
cold water (adding the prewash
detergent), tumble the clothes, drain
and spin. Then the washer will run the
selected wash cycle.
To lock the washer, press and hold
the Extra Rinse and Pre Wash
buttons for 3 seconds.
To unlock the washer controls, press
and hold Extra Rinse and Pre Wash
buttons for 3 seconds.
NOTE: The Power button can still be
used when the machine is locked.
NOTE: When using My Cycle, wash
options cannot be modified after the
cycle has been started.
NOTE: If you change wash options
with My Cycle before starting the cycle,
the My Cycle light will turn off and you
will be returned to the base cycle.
- 10 -
Hide quick links:
Advertisement
Table of Contents
