Advertisement
Chapter 2
Hardware
Installation
This product provides two different running speeds - 10Mbps, 100Mbps in
the same device and automatically distinguishes the speed of the incoming
connection.
This section describes the hardware installation of MS-PoE. Before
connecting any network device to the MS-PoE, read this section carefully.
Before Installation
Before your installation, it is recommended that you check your network
environment. If there are any IEEE 802.3af devices that you need to power.
The MS-PoE can provide you a way to supply power for this Ethernet device
conveniently and easily. The MS-PoE works with an AC-DC adapter (not
supplied) with DC 48V input and injects this DC power into the pin of the
twisted pair cable (pair 4, 5 and pair 7, 8 for Fast Ethernet).
If it is very difficult to find a power socket for an AC-DC Adapter of your non
IEEE 802.3af networked device, the MS-PoE and SP-POE can provide you a
way to supply DC power for this Ethernet device conveniently and easily.
MS-PoE Injector User Manual
7
firealarmresources.com
Advertisement
