Onboard Fdc Controller - Gigabyte GA-6WFZ7 User Manual

6WFZ7 Series Motherboard
POWER ON Function
Password
Mouse Left
Mouse Right
BUTTON ONLY
Keyboard 98

Onboard FDC Controller

Enabled Enable onboard FDC port. ( Default value )
Disabled Disable onboard FDC port.
Onboard Serial Port 1
BIOS will automatically setup the port 1 address. ( Default value )
Auto
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8.
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
UART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR Onboard I/O chip supports ASKIR.
IrDA Onboard I/O chip supports IrDA.
Onboard I/O chip supports Normal. ( Default value )
Normal
R D T D Active
x , x
Hi, Hi RxD set Hi, TxD set Hi.
Hi, Lo RxD set Hi, TxD set Lo. ( Default value )
Lo, Hi RxD set Lo,TxD set Hi.
Lo, Lo RxD set Lo,TxD set Lo.
IR Transmittiion delay
Set IR Transmittiion delay Enabled. ( Default value )
Enabled
Disabled Set IR Transmittiion delay Disabled.
Enter from 1 to 5 characters to set the Keyboard Power On
Password.
Double click twice on PS/2 left bottom.
Double click twice on PS/2 right bottom.
If your keyboard have "POWER Key" button, you can press the
key to power on your system. ( Default value )
Windows 98 keyboard "Power" key.
57