Gigabyte GA-6WMMC7 User Manual
  1. Manuals
  2. Brands
  3. Gigabyte Manuals
  4. Motherboard
  5. GA-6WMMC7
  6. User manual
Gigabyte GA-6WMMC7 User Manual

Gigabyte GA-6WMMC7 User Manual

6wmmc7 series socket 370 processor main board
Hide thumbs Also See for GA-6WMMC7:
Table of Contents

Advertisement

Quick Links

Download this manual
6WMMC7 Series
USER'S MANUAL
1.
Support Suspend To RAM Function.
2.
Support Hardware Monitor.
3.
System power on by PS/2 Mouse: First, enable this function
in CMOS Setup, then you can power on the system by double
clicking the right or left button of your PS/2 Mouse.
4.
System power on by Keyboard: If your ATX power supply
supports larger than 300 mA 5V Stand-By current (depends
on the specification of keyboards), you can power on your
system by entering password from the Keyboard after setting
the "Keyboard power on" jumper and password in CMOS
Setup.
5.
Support 3 steps ACPI LED selectable.
6.
Support Modem Ring-On (Include internal Modem and
external modem on COM A).
7.
Support Wake-up On LAN (Your ATX power supply must
support larger than 720 mA 5V Stand-By current).
8.
Built-in AC97-Link software audio.
9.
Support Audio / Modem Riser (AMR) interface.
10. Support TV/DFP(Digital Flat Panel) function by TV/DFP
daughter card (Optional).
11. Aureal AU8810 Hardware Audio (Optional).
Socket 370 Processor MAIN BOARD
REV. 2.1 First Edition
R-21-01-091213

Advertisement

Table of Contents
loading

Related Manuals for Gigabyte GA-6WMMC7

Summary of Contents for Gigabyte GA-6WMMC7

  • Page 1 6WMMC7 Series USER'S MANUAL Support Suspend To RAM Function. Support Hardware Monitor. System power on by PS/2 Mouse: First, enable this function in CMOS Setup, then you can power on the system by double clicking the right or left button of your PS/2 Mouse. System power on by Keyboard: If your ATX power supply supports larger than 300 mA 5V Stand-By current (depends on the specification of keyboards), you can power on your...
  • Page 3 6WMMC7 Series The author assumes no responsibility for any errors or omissions that may appear in this document nor does it make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. Dec.
  • Page 4 I. Quick Installation Guide : CPU SPEED SETUP The system bus frequency can be switched at 66MHz / 100MHz / 133MHz and Auto by adjusting JP5,JP23. The CPU ratio is control by BIOS. The CPU speed must match with the frequency ratio. It will cause system hanging up if the frequency ratio is higher than that of CPU.
  • Page 5 6WMMC7 Series II. Jumper Setting : GN : Green Function Switch AC97 8810 PIN No. Function Open Normal Operation 6WMMC7 Short Entering Green ICH/ 82801 FWH32 GD : Green Function LED AC97 8810 PIN No. Function 6WMMC7 ICH/ 82801 FWH32 GMCH/ 82810 / 810E...

  • Page 6: External Speaker

    HD : IDE Hard Disk Active LED AC97 8810 PIN No. Function 6WMMC7 ICH/ 82801 FWH32 SPKR: External Speaker Connector AC97 8810 External Speaker 6WMMC7 ICH/ 82801 FWH32 Quick Installation Guide GMCH/ 82810 LED + PIN No. Function GMCH/ 82810 Data...
  • Page 7 6WMMC7 Series J9: Buzzer Enable (Optional) AC97 8810 PIN No. Function Open Internal Buzzer Disable Close Internal Buzzer Enable 6WMMC7 ICH/ 82801 FWH32 RES : Reset Switch AC97 PIN No. Function 8810 Open Normal Operation Short Reset Hardware 6WMMC7 System ICH/ 82801 FWH32...
  • Page 8 PWR : Power LED Connector (as 3 steps ACPI LED) AC97 8810 PIN No. Function 6WMMC7 ICH/ 82801 FWH32 PW: Soft Power Connector AC97 8810 PIN No. Function Open Normal operation 6WMMC7 ICH/ Short Soft On/Off 82801 FWH32 Quick Installation Guide LED + GMCH/ 82810...
  • Page 9 6WMMC7 Series IR : Infrared Connector (IR / CIR) AC97 Function IRRX 8810 IRTX 6WMMC7 CIRRX ICH/ 82801 FWH32 PS/2 Mouse / Keyboard Connector AC97 PS/2 Mouse 8810 6WMMC7 ICH/ PS/2 Keyboard 82801 FWH32 GMCH/ 82810/ 810E PS/2 Mouse/ Keyboard Pin No.
  • Page 10 USB : USB Port AC97 PIN No. 8810 1 2 3 4 6WMMC7 ICH/ 82801 FWH32 CPU FAN : CPU Cooling Fan Power Connector AC97 PIN No. Function 8810 6WMMC7 ICH/ 82801 FWH32 Quick Installation Guide Function USB V0 USB D0- USB D0+ USB V1 USB D1-...
  • Page 11 6WMMC7 Series POWER FAN : Power Cooling Fan Power Connector AC97 8810 6WMMC7 ICH/ 82801 FWH32 SYSTEM FAN : System Cooling Fan Power Connector AC97 8810 PIN No. Function +12V 6WMMC7 ICH/ SENSE 82801 FWH32 PIN No. Function GMCH/ +12V 82810 SENSE GMCH/...
  • Page 12 IDE1: Primary IDE Port AC97 8810 6WMMC7 ICH/ 82801 FWH32 IDE2: Secondary IDE Port AC97 8810 6WMMC7 ICH/ 82801 FWH32 Quick Installation Guide GMCH/ 82810/ 810E GMCH/ 82810/ 810E...
  • Page 13 6WMMC7 Series FLOPPY : Floppy Port AC97 8810 6WMMC7 ICH/ 82801 FWH32 ATX POWER : ATX Power Connector AC97 Pin No. Function 3,5,7,13, 15-17 1,2,11 3.3V 8810 4,6,19,20 VCC +12V -12V 6WMMC7 ICH/ 82801 Power Good FWH32 5V SB stand by+5V PS-ON(Soft On/Off) GMCH/ 82810/...
  • Page 14 COM A / LPT Port LPT PORT AC97 8810 6WMMC7 ICH/ 82801 FWH32 VGA : VGA Port AC97 8810 6WMMC7 ICH/ 82801 FWH32 Quick Installation Guide COM A GMCH/ 82810/ 810E GMCH/ 82810/ 810E...
  • Page 15 6WMMC7 Series JP12:Clear CMOS Function AC97 3 2 1 8810 PIN No. 1-2 close Clear CMOS 6WMMC7 2-3 close Normal (Default) ICH/ 82801 FWH32 JP2: PS/2 Keyboard Power On Selection AC97 PIN No. Function PS/2 Keyboard Power 8810 close on Enabled PS/2 Keyboard Power 6WMMC7 close...
  • Page 16 J8:Game & Audio Port AC97 8810 Line Out Line In 6WMMC7 ICH/ 82801 FWH32 J7:CD Audio Line In AC97 8810 PIN No. Function 6WMMC7 ICH/ 82801 FWH32 Quick Installation Guide GAME GMCH/ 82810/ 810E GMCH/ CD_L 82810/ 810E CD_R...
  • Page 17 6WMMC7 Series JP11:AUX_IN AC97 JP11 8810 6WMMC7 ICH/ 82801 FWH32 JP3 TEL :The connector is for Modem with internal voice connector. AC97 8810 PIN No. Function 6WMMC7 ICH/ 82801 FWH32 PIN No. Function AUX_L AUX_R GMCH/ 82810/ 810E GMCH/ 82810/ Phone-in 810E Mono-out...
  • Page 18 JP18 SPDIF:(Optional for the SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dobly Digital decoder.) AC97 PIN No. 8810 6WMMC7 ICH/ 82801 FWH32 J14 : Wake on LAN AC97 PIN No. Function +5V SB Signal 8810...
  • Page 19 6WMMC7 Series J17 RING PWR ON: Internal Modem Card Ring Pwr On AC97 8810 PIN No. Function Signal 6WMMC7 ICH/ 82801 FWH32 JP1 : STR Function (If you want to use STR Function, please set jumper JP1 Closed.) AC97 8810 6WMMC7 PIN No.
  • Page 20 JP10 : STR LED Connector & DIMM LED AC97 STR LED Connector 8810 External. 6WMMC7 JP10 ICH/ DIMM LED 82801 FWH32 JP14 : Case Open AC97 JP14 PIN No. Function Signal 8810 6WMMC7 ICH/ 82801 FWH32 Quick Installation Guide GMCH/ 82810/ 810E GMCH/...
  • Page 21 6WMMC7 Series JP16: Top Block Lock AC97 PIN No. Function Open Top Block Lock 8810 Close Top Block Unlock (Default) 6WMMC7 ICH/ 82801 FWH32 JP13 :Safe mode/Recovery/Normal AC97 8810 PIN No. 6WMMC7 ICH/ 1-2close 82801 FWH32 2-3close 1-2-3open Recovery GMCH/ 82810/ 810E GMCH/...
  • Page 22 JP17: Onboard Sound Function (Optional) AC97 8810 PIN No. Function 1-2close Enabled Sound 6WMMC7 (Default) ICH/ 2-3close Disabled Sound 82801 FWH32 TV/DFP :TV-Out / Digital Flat Panel Daughter Card Connector(Optional). AC97 8810 6WMMC7 ICH/ 82801 FWH32 Quick Installation Guide GMCH/ 82810/ 810E GMCH/...
  • Page 23 6WMMC7 Series J13/J20 : USB Port Selection (Optional) AC97 J13 J20 8810 PIN No. 1-2close 1-2close 6WMMC7 ICH/ 2-3close 82801 2-3close FWH32 J19 : Front Panel USB Port (Optional) AC97 8810 6WMMC7 ICH/ 82801 FWH32 Function Front Panel USB GMCH/ Enable 82810 Back Panel USB...
  • Page 24 JP15: Timeout Reboot Function AC97 PIN No. Function 8810 Open Timeout Reboot Close No Reboot on Timeout (Default) 6WMMC7 ICH/ JP15 82801 FWH32 JP19: USB Device Wake-up Function Quick Installation Guide GMCH/ 82810/ 810E...
  • Page 25 6WMMC7 Series AC97 PIN No. 1-2 close Disable USB Device 2-3 close Enable USB Device 8810 JP19 6WMMC7 ICH/ (If you want to use “USB KB/Mouse Wake from S3” 82801 FWH32 function, you have to set the BIOS setting “USB KB/Mouse Wake from S3”...
  • Page 26 JP20/JP21:Quad Speaker (Optional) AC97 8810 JP20 JP21 6WMMC7 PIN No. ICH/ JP20 1-2close 82801 FWH32 JP21 1-2close JP20 2-3close JP21 2-3close JP24: FWH Write Protection AC97 JP24 8810 Open Close 6WMMC7 PIN No. Function ICH/ 82801 FWH32 Open Normal(Default) Close Write Protection BAT1: Battery Quick Installation Guide...
  • Page 27 6WMMC7 Series AC97 Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according 8810 to the manufacturer’s instructions GMCH/ 6WMMC7 82810 ICH/ 82801 FWH32...
  • Page 28 III. Top Performance Test Setting: The following performance data list is the testing results of some popular benchmark testing programs. Users have to modify the value for each item in chipset features as follow for top performance setting. CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Advanced Chipset Features SDRAM CAS Latency Time SDRAM Cycle Time Tras/Trc...
  • Page 29 6WMMC7 Series These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) Intel Celeron DRAM (128x 1) MB SDRAM (SEC KM48S8030CT-GA) CACHE SIZE 128 KB included in CPU DISPLAY...
  • Page 31 6WMMC7 Series Celeron 433 OC 450 (100*4.5) DRAM (64x 2) MB SDRAM (MITSUBISHI M2V64S40BTP) STORAGE Onboard IDE (IBM DJNA-352030) (ATA66) Windows98 SE2 English Ver(FAT32), DirectX 6.1, Driver 4.11.01 1185 PV 1.1 1024*768*16 bit (75Hz) Motherboard GMCH WINBENCH 99 CPU mark32 FPU Winmark Business Disk Hi-End Disk...
  • Page 32 IV. Suspend to RAM Installation A.1 Introduce STR function: Suspend-to-RAM (STR) is a Windows 98 ACPI sleep mode function. When recovering from STR (S3) sleep mode, the system is able, in just a few seconds, to retrieve the last “state” of the system before it went to sleep and recover to that state.
  • Page 33 6WMMC7 Series Step 2: (If you want to use STR function, please set jumper JP1 Closed.) AC97 8810 PIN No. 6WMMC7 ICH/ Close 82801 FWH32 Open Step 3: Power on the computer and as soon as memory counting starts, press <Del>. You will enter BIOS Setup.
  • Page 34 A.3 How to put your system into STR mode? There are two ways to accomplish this: Choose the “Stand by” item in the “Shut Down Windows” area. A. Press the “Start” button and then select “Shut Down” B. Choose the “Stand by” item and press “OK” Suspend to RAM Installation...
  • Page 35 6WMMC7 Series Define the system ”power on” button to initiate STR sleep mode: A. Double click “My Computer” and then “Control Panel” B. Double click the “ Power Management” item.
  • Page 36 C. Select the “Advanced” tab and “Standby” mode in Power Buttons. Step 4: Restart your computer to complete setup. Now when you want to enter STR sleep mode, just momentarily press the “Power on” button.. A.4 How to recover from the STR sleep mode? There are seven ways to “wake up”...
  • Page 37 6WMMC7 Series A.5 Notices : In order for STR to function properly, several hardware and software requirements must be satisfied: A. Your ATX power supply must comply with the ATX 2.01 specification (provide more than 720 mA 5V Stand-By current). B.

  • Page 39: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION 1.1. PREFACE ... 1-1 1.2. KEY FEATURES ... 1-1 1.3. PERFORMANCE LIST ... 1-2 1.4. BLOCK DIAGRAM... 1-4 1.5. INTRODUCE THE INTEL Celeron 1.6. INTRODUCE AMR ... 1-5 SPECIFICATION 2.1. HARDWARE ... 2-1 2.2. SOFTWARE ... 2-2 2.3.
  • Page 40 6WMMC7 Series BIOS CONFIGURATION 4.1. ENTERING SETUP ... 4-1 4.2. CONTROL KEYS ... 4-1 4.3. GETTING HELP ... 4-2 4.3.1. Main Menu ... 4-2 4.3.2. Status Page Setup Menu / Option Page Setup Menu... 4-2 4.4. THE MAIN MENU ... 4-2 4.5.

  • Page 41: Introduction

    1. INTRODUCTION 1.1. PREFACE Welcome to use the 6WMMC7 Series(6WMMC7 / 6WMMC7-1) motherboard. It is a Socket 370 processor based PC / AT compatible system with PCI Bus, and has been designed to be the fastest PC / AT system. There are some new features allow you to operate the system with just the performance you want.

  • Page 42: Performance List

    6WMMC7 Series 1.3. PERFORMANCE LIST The following performance data list is the testing results of some popular benchmark testing programs. These data are just referred by users, and there is no responsibility for different testing data values gotten by users. (The different Hardware & Software configuration will result in different benchmark testing results.) Intel Celeron...
  • Page 43 Celeron 433 OC 450 (100*4.5) DRAM (64x 2) MB SDRAM (MITSUBISHI M2V64S40BTP) STORAGE Onboard IDE (IBM DJNA-352030) (ATA66) Windows98 SE2 English Ver(FAT32), DirectX 6.1, Driver 4.11.01 1185 PV 1.1 1024*768*16 bit (75Hz) Motherboard GMCH WINBENCH 99 CPU mark32 FPU Winmark Business Disk Hi-End Disk Business Graphics...

  • Page 44: Block Diagram

    6WMMC7 Series 1.4. BLOCK DIAGRAM Socket 370 Display 82810DC100 Display Cache 82810E 82801AA ATA66 IDE Channels 2 USB Ports COM Port Winbond LPT Port W83627 Floppy IR/CIR PS/2 66/100/133 MHz Host Bus 66/100/133MHz 66/100/133 MHz GMCH 82810 3.3V SDRAM 100 MHz 14.318/33/48/66 MHz Interface 9248-96...

  • Page 45: Introduce The Intel Celeron Tm Socket 370 Processor

    Introduction 1.5. INTRODUCE THE INTEL Celeron Socket 370 Processor Figure 1: INTEL Celeron Socket370 Processor 1.6 INTRODUCE AMR The Audio Modem Riser (AMR) is a new port that supports both audio and modem. The main purpose of the AMR port is to provide lower cost and higher levels of integration at all levels of the PC platform.

  • Page 47: Specification

    6WMMC7 Series 2. SPECIFICATION 2.1. HARDWARE Socket 370 processor. 66/100/133 MHz Socket 370 on board. Speaker Alarm when detect "CPU FAN Failure" or PROTECTION “CPU Overheat”. Automatically slow down CPU speed when "CPU Overheat". H/W monitor power status ( 5V, 12V, VGTL,5VSB, CPU voltage &...

  • Page 48: Software

    1x Line in Audio Ports 1x Line out 1x Mic in 1x Game Port 1x CD Line in 1x TEL 1x SPDIF Out (Optional) 1x AUX In. Suspend mode support. GREEN FUNCTION Green switch & ACPI LED support. IDE & Display power down support. Monitors all IRQ / DMA / Display / I/O events.

  • Page 49: Hardware Installation

    6WMMC7 Series HARDWARE INSTALLATION 3.1. UNPACKING The main board package should contain the following: The 6WMMC7 Series ( 6WMMC7/6WMMC7-1) main board. USER'S MANUAL for main board. Cable set for IDE, Floppy devices. CD for main board Utility. [IUCD (Bus Master + Sound Driver + LDCM + Utility), INTEL 82810 Driver.] The main board contains sensitive electric components, which can be easily damaged by static electricity, so the main board should be left in its original...

  • Page 50: Main Board Layout

    3.2. MAIN BOARD LAYOUT 6WMMC7 JP14 AC97 JP11 8810 JP23 ICH/ JP16 JP15 82801 FWH32 JP13 JP12 JP24 JP10 6WMMC7-1 JP14 AC97 JP11 8810 JP23 ICH/ JP16 JP15 82801 FWH32 JP13 JP12 JP24 JP10 Hardware Installation Game & PS/2 COMA Audio JP19 JP18...

  • Page 51: Quick Reference For Jumpers & Connectors

    6WMMC7 Series 3.3. QUICK REFERENCE FOR JUMPERS & CONNECTORS I/O Ports Connector USB port. IDE1 For Primary IDE port. IDE2 For Secondary IDE port. PS/2 For PS/2 Mouse & Keyboard port. FLOPPY For Floppy port. COMA For Serial port1 (COM A){Support Modem Ring On}. For LPT port.
  • Page 52 PWR FAN: Power FAN Connector Pin No. GND. +12V SENSE SYS FAN: System FAN Connector Pin No. GND. +12V SENSE J9:Buzzer Enable (Optional) Pin No. Open Internal Buzzer Disable Close Internal Buzzer Enable J17 RING PWR ON :Internal Modem Card Ring PWR On Pin No.
  • Page 53 6WMMC7 Series Pin No. AUX_L AUX_R J14:Wake on LAN Pin No. +5VSB Signal JP3:TEL –The connector for Modem with internal voice connector. Pin No. Phone-in Mono-out JP1:STR Enable Pin No. Close STR Enable Open STR Disable (Default) JP14: Case Open Pin No.
  • Page 54 Pin No. Open Timeout Reboot. Close No Reboot on Timeout. (Default) JP17: Onboard Sound function (Optional) Pin No. 1-2 close Enabled Sound.(Default) 2-3 close Disabled Sound. J13/ J20: USB Port Selection (Optional) Pin No. 1-2 close Front Panel USB Port Enabled. 2-3 close Back Front Panel USB Port Enabled.
  • Page 55 6WMMC7 Series JP24:FWH Write Protection Pin No. Function Open Normal (Default) Close Write Protection. J12 : For 2X11 PINs Jumper PWR P+P P HD Soft PWR: Soft Power Connector Open: Normal Operation Short: Power On/Off RES: Reset Switch Open: Normal Operation Short: For Hardware Reset System P+P P : Power LED PIN 1 : LED anode (+)

  • Page 56: Dram Installation

    HD: IDE Hard Disk Active LED PIN 1: LED anode (+) PIN 2: LED cathode ( ) GN: Green Function Switch Open : Normal operation Short : Entering Green Mode GD: Green LED PIN 1 : LED anode (+) PIN 2 : LED cathode ( ) 3.4.

  • Page 57: Cpu Speed Setup

    6WMMC7 Series 3.5. CPU SPEED SETUP The system bus frequency can be switched at 66MHz / 100MHz / 133MHz and Auto by adjusting JP5,JP23. The CPU ratio is control by BIOS. JP5 /JP23: System Bus Speed Set System Bus Speed (See Figure-1) AC97 JP23 2-3 66/100...

  • Page 58: Cmos Rtc & Isa Cfg Cmos Ram

    3.6. CMOS RTC & ISA CFG CMOS RAM There're RTC & CMOS RAM on board; they have a power supply from external battery to keep the DATA inviolate & effective. The RTC is a REAL-TIME CLOCK device, which provides the DATE & TIME to system. The CMOS RAM is used for keeping the information of system configuration, so the system can automatically boot OS every time.

  • Page 59: Peripheral Device Installation

    6WMMC7 Series 3.11. PERIPHERAL DEVICE INSTALLATION After the I/O device installation and jumpers setup, the main board can be mounted into the chassis and fixed by screw. To complete the main board installation, the peripheral device could be installed now. The basic system needs a display interface card.

  • Page 60: Bios Configuration

    4.BIOS CONFIGURATION Award's BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.

  • Page 61: Getting Help

    6WMMC7 Series 4.3. GETTING HELP 4.3.1. Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. 4.3.2. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item.
  • Page 62 Standard CMOS Features This setup page includes all the items in standard compatible BIOS. Advanced BIOS Features This setup page includes all the items of Award special enhanced features. Advanced Chipset Features This setup page includes all the items of chipset special features. Integrated Peripherals This setup page includes all onboard peripherals.
  • Page 63 6WMMC7 Series Set User password Change, set, or disable password. It allows you to limit access to the system. Save & Exit Setup Save CMOS value settings to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup.

  • Page 64: Standard Cmos Features Menu

    4.5. STANDARD CMOS FEATURES MENU The items in Standard CMOS Setup Menu (Figure 4.2) are divided into 9 categories. Each category includes no, one or more than one setup items. Use the arrows to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item.
  • Page 65 6WMMC7 Series Date The date format is <week>, <month> <day> <year>. week The week, from Sun to Sat, determined by the BIOS and is display-only month The month, Jan. Through Dec. The day, from 1 to 31 (or the maximum allowed in the month) year The year, from 1994 through 2079 Time...
  • Page 66 Drive A type / Drive B type The category identifies the types of floppy disk drive A or drive B that has been installed in the computer. None No floppy drive installed 360K, 5.25 in. 5.25 inch PC-type standard drive; 360K byte capacity. 1.2M, 5.25 in.
  • Page 67 6WMMC7 Series Halt on The category determines whether the computer will stop if an error is detected during power up. NO Errors The system boot will not stop for any error that may be detected and you will be prompted All Errors Whenever the BIOS detects a non-fatal error the system will be stopped...

  • Page 68: Advanced Bios Features

    4.6. Advanced BIOS Features CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Advanced BIOS Features Virus Warning CPU Cache CPU L2 Cache ECC Checking *Processor Number Feature Quick Power On Self Test First Boot Device Second Boot Device Third Boot Device Boot Other Device Swap Floppy Drive Boot Up Floppy Seek...
  • Page 69 6WMMC7 Series CPU Cache These two categories speed up memory access. However, it depends on CPU / chipset design. The default value is Enabled. Enabled Enable cache Disabled Disable cache CPU L2 Cache ECC Checking The default value is Disabled. Enabled Enable CPU L2 Cache ECC Checking Disabled...
  • Page 70 First / Second / Third Boot device The default value is Floppy / HDD-0 / LS/ZIP. Floppy Select your boot device priority by Floppy LS/ZIP Select your boot device priority by LS/ZIP HDD-0~3 Select your boot device priority by HDD-0~3 SCSI Select your boot device priority by SCSI CDROM...
  • Page 71 6WMMC7 Series Boot Up NumLock Status The default value is On. Keypad is number keys. Keypad is arrow keys. Gate A20 Option The default value is Fast. Normal Set Gate A20 Option is Normal. Fast Set Gate A20 Option is Fast. Typematic Rate Setting The default value is Disabled.
  • Page 72 OS Select For DRAM>64MB The default value is Non-OS2. Non-OS2 Using non-OS2 operating system. Using OS2 operating system and DRAM>64MB. HDD S.M.A.R.T. Capability The default value is Disable. Enable Enable HDD S.M.A.R.T. Capability Disable Disable HDD S.M.A.R.T. Capability Report No FDD For WIN 95 The default value is No.

  • Page 73: Advanced Chipset Features

    6WMMC7 Series 4.7. Advanced Chipset Features CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Advanced Chipset Features SDRAM CAS Latency Time SDRAM Cycle Time Tras/Trc SDRAM RAS-to-CAS Delay SDRAM RAS Precharge Time SDRAM Buffer Strength DRAM Page Closing Policy System BIOS Cacheable Video BIOS Cacheable Delayed Transaction On-Chip Video Window Size...
  • Page 74 SDRAM RAS- to-CAS delay The default value is 2 Set SDRAM RAS- to-CAS delay 3 SCLKs. Set SDRAM RAS-to-CAS delay 2 SCLKs. SDRAM RAS Precharge The default value is 2. Set SDRAM RAS Precharge is 3. Set SDRAM RAS Precharge is 2. SDRAM Buffer Strength The default value is Auto.
  • Page 75 6WMMC7 Series Delayed Transaction The default value is Disabled. Disabled Normal operation. Enabled For slow speed ISA device in system. On-Chip Video Window Size The default value is 64MB. 32MB Set Graphics Aperture Size to 32MB. 64MB Set Graphics Aperture Size to 64MB. Local Memory Frequency The default value is 100MHz.

  • Page 76: Integrated Peripherals

    4.8. Integrated Peripherals CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Integrated Peripherals On-Chip Primary PCI IDE On-Chip Secondary PCI IDE IDE Primary Master PIO IDE Primary Slave PIO IDE Secondary Master PIO IDE Secondary Slave PIO IDE Primary Master UDMA IDE Primary Slave UDMA IDE Secondary Master UDMA IDE Secondary Slave UDMA...
  • Page 77 6WMMC7 Series On-Chip Primary PCI IDE The default value is Enabled. Enabled Enable onboard 1st channel IDE port. Disabled Disable onboard 1st channel IDE port. On-Chip Secondary PCI IDE The default value is Enabled. Enabled Enable onboard 2nd channel IDE port. Disabled Disable onboard 2nd channel IDE port.
  • Page 78 IDE Secondary Slave PIO (for onboard IDE 2nd channel). The default value is Auto. Auto BIOS will automatically detect the IDE HDD Accessing mode. Mode0~4 Manually set the IDE Accessing mode. IDE Primary Master UDMA. The default value is Auto. Auto BIOS will automatically detect the IDE HDD Accessing mode.
  • Page 79 6WMMC7 Series USB Controller The default value is Enabled. Enabled Enable USB Controller. Disabled Disable USB Controller. USB Keyboard Support The default value is Disabled. Enabled Enable USB Keyboard Support. Disabled Disable USB Keyboard Support. Init Display First The default value is PCI Slot. PCI Slot Set Init Display First to PCI Slot.
  • Page 80 POWER ON Function (Optional) The default value is BUTTON ONLY. Password Enter from 1 to 5 characters to set the Keyboard Power On Password. Please set password with three different characters, Hot KEY and press the three different characters password at the same time.
  • Page 81 6WMMC7 Series UART Mode Select (This item allows you to determine which Infra Red(IR) function of Onboard I/O chip) The default value is Normal ASKIR Onboard I/O chip supports ASKIR. IrDA Onboard I/O chip supports IrDA. Normal Onboard I/O chip supports Normal. RxD , TxD Active The default value is Hi,Lo.
  • Page 82 EPP Version The default value is 1.7. EPP 1.9 EPP Version is 1.9. EPP 1.7 EPP Version is 1.7. ECP Mode Use DMA The default value is 3. Set ECP Mode Use DMA is 1. Set ECP Mode Use DMA is 3. Game Port Address The default value is 201.

  • Page 83: Power Management Setup

    6WMMC7 Series 4.9. POWER MANAGEMENT SETUP CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Power Management Setup ACPI Suspend Type Power Management Video Off Method Video Off In Suspend Suspend Type MODEM Use IRQ Suspend Mode HDD Power Down Soft-Off by PWR-BTTN Power LED in Suspend AC BACK Function Wake-Up by PCI card...
  • Page 84 Power Management The default value is User Define. User Define For configuring our own power management features. Min Saving Enable Green function. Max Saving Disable Green function. Video off Method The default value is DPMS. V/H SYNC+Blank BIOS will turn off V/H-SYNC when gets into Green mode for Green monitor power saving.
  • Page 85 6WMMC7 Series Suspend Mode The default value is Disable. Disabled Disable Suspend Mode. 1 min - 1 Hour Setup the timer to enter Suspend Mode. HDD Power Down The default value is Disable. Disable Disable HDD Power Down mode function. 1-15 mins.
  • Page 86 ModemRingOn / WakeOnLan The default value is Enabled. Disabled Disable these functions. Enabled Enable these functions. FAN Off In Suspend The default value is Enabled. Disabled Disable this function. Enabled Stop CPU FAN when entering Suspend mode. USB KB/Mouse Wake From S3 The default value is Disabled.
  • Page 87 6WMMC7 Series Resume by Alarm The default value is Disabled. Disabled Disable this function. Enabled Enable alarm function to POWER ON system. If the default value is Enabled. Date ( of Month) Alarm : Time ( hh: mm: ss) Alarm : Primary IDE 0/1 The default value is Disabled.

  • Page 88: Pnp/Pci Configurations

    4.10. PnP/PCI Configurations CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software PnP/PCI Configurations PNP OS Installed Reset Configuration Data Resources Controlled By * IRQ Resources *DMA Resources *Memory Resources PCI/VGA Palette Snoop Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 4.7: PCI Slot Configuration PNP OS Installed The default value is No.
  • Page 89 6WMMC7 Series Resources Controlled by The default value is Auto (ESCD) Manual User can set the PnP resource (I/O Address, IRQ & DMA channels) used by legacy ISA DEVICE. Auto BIOS automatically use these PnP rescuers. IRQ (3,4,5,7,9, 10,11,12,14,15),DMA(0,1,3,5,6,7) assigned to The default value is "Legacy ISA"...

  • Page 90: Pc Health Status

    4.11. PC Health Status CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software PC Health Status Reset Case Open Status Case Opened Current CPU Temperature CPU FAN Fail Alarm Power FAN Fail Alarm System FAN Fail Alarm VCORE VGTL VCC3 + 5V +12V - 12V - 5V...
  • Page 91 6WMMC7 Series Current Voltage (V) VCORE / VGTL/ VCC3 / 12V / 5V /VBAT /5VSB Detect system’s voltage status automatically. CPU Warning Temperature ( C / F) The default value is 70 C /158 F 65 C / 149 F Monitor CPU Temp.

  • Page 92: Frequency/Voltage Control

    4.12. Frequency/Voltage Control CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Frequency/Voltage Control Auto Detect DIMM/PCI Clk Spread Spectrum CPU Type CELERON ™ Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 4.9: Frequency/Voltage Control Auto Detect DIMM/PCI Clk The default value is Enabled.
  • Page 93 6WMMC7 Series CPU Type CELERON (Depends on Your CPU Type) 1. System Bus Speed :66MHz 200 / 233 / 266 / 300 / 333 / 366 / 400 / 433 / 466 / 500 / 533 2. System Bus Speed : 100MHz 300 / 350 / 400 / 450 / 500 / 550 / 600 / 650 / 700 / 750 / 800 3.

  • Page 94: Load Fail-Safe Defaults

    4.13. Load Fail-Safe Defaults CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations Load Fail-Safe Defaults (Y/N)? N PC Health Status ESC:Quit F10:Save & Exit Setup Load Fail-Safe Defaults Figure 4.10: Load Fail-Safe Defaults Load Fail-Safe Defaults...

  • Page 95: Load Optimized Defaults

    6WMMC7 Series 4.14. Load Optimized Defaults CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup Load Optimized Defaults (Y/N)? N PnP/PCI Configurations PC Health Status ESC:Quit F10:Save & Exit Setup Load Optimized Defaults Figure 4.11: Load Optimized Defaults Load Optimized Defaults...
  • Page 96 4.15. Set Supervisor / User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals...

  • Page 97: Set Suupervisor/User Password

    6WMMC7 Series 4.16. Save & Exit Setup CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations SAVE to CMOS and EXIT (Y/N)? Y PC Health Status ESC:Quit F10:Save &...

  • Page 98: Exit Without Saving

    4.17. Exit Without Saving CMOS Setup Utility-Copyright( C ) 1984-1999 Award Software Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations Quit Without Saving (Y/N)? N PC Health Status ESC:Quit F10:Save & Exit Setup Abandon all Datas Figure 4.14: Exit Without Saving Type "Y"...

  • Page 100: A.onboard Driver Installation Procedure

    6WMMC7 Series APPENDIX A: Onboard Driver Installation Procedure (In this manual, we assume that your CD-ROM Drive letter to be Drive D: ) Please reference TUCD CD directory D: \ Manual \ Whitney810.pdf 810 INF update utility can’t find ICHxIDE.cat file automatically After the installation is of Winodws98 is completed, run the “Setup.exe”...

  • Page 102: B.bios Flash Procedure

    C:\utility\ AWDFlash or AMIFlash <filename of the BIOS binary file intended for flashing> Once the process is finished, reboot the system Note : Please download the newest BIOS from our website (www.gigabyte.com.tw) or contact your local dealer for the file. Appendix...

  • Page 104: C.au8810 Driver Installation

    6WMMC7 Series Appendix C : AU8810 Driver Installation A. DRIVER INSTALLATION If you have older drivers in your system, please uninstall them first as described in Section C below. 1. Power on the system, placing the "Intel chipset Series Mainboard Utility CD" in the CD-ROM drive.
  • Page 105 B. UNINSTALLING WINDOWS 95/98 DRIVERS To uninstall the Vortex software, you can use the following procedure: 1. Open to the Windows 95/98 Device Manager (right-click on "My Computer" and select "Properties"). 2. Open the "Multifunction Adapters" tree and select "Vortex Multifunction PCI Platform"...
  • Page 106 Product Name: Mother Board residential Model Number: GA-6WMMC7 generates, Conforms to the following specifications: FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a), frequency energy, and if not installed and used Class B Digital Device...

  • Page 107: Declaration Of Conformity

    Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installation to which it refers) Mother Board GA-6WMMC7 is in conformity with (reference to the specification under which conformity is declared) in accordance with 89/336 EEC-EMC Directive...

This manual is also suitable for:

Ga-6wmmc7-1

Table of Contents