Usb Legacy Support; Init Display First; Onboard Fdc Controller; Onboard Serial Port 1 - Gigabyte GA-8SDX User Manual

? USB Legacy Support

Enable USB Legacy Support.
?Enabled
Disable USB Legacy Support. (Default value)
?Disabled

? Init Display First

Set Init Display First to AGP. (Default value)
?AGP
Set Init Display First to PCI.
?PCI
? Onboard Hardware Audio
Enable Onboard Hardware Audio function. (Default value)
?Enabled
Disable this function.
?Disabled

? Onboard FDC Controller

Enable onboard FDC port. (Default value)
?Enabled
Disable onboard FDC port.
?Disabled

? Onboard Serial Port 1

BIOS will automatically setup the port 1 address.
?Auto
Enable onboard Serial port 1 and address is 3F8. (Default value)
?3F8/IRQ4
Enable onboard Serial port 1 and address is 2F8.
?2F8/IRQ3
Enable onboard Serial port 1 and address is 3E8.
?3E8/IRQ4
Enable onboard Serial port 1 and address is 2E8.
?2E8/IRQ3
Disable onboard Serial port 1.
?Disabled

? Onboard Serial Port 2

BIOS will automatically setup the port 2 address.
?Auto
Enable onboard Serial port 2 and address is 3F8. (Default value)
?3F8/IRQ4
Enable onboard Serial port 2 and address is 2F8.
?2F8/IRQ3
Enable onboard Serial port 2 and address is 3E8.
?3E8/IRQ4
Enable onboard Serial port 2 and address is 2E8.
?2E8/IRQ3
35
BIOS Setup