Reset Configuration Data; Resources Controlled By - Gigabyte GA-6WFZ7 User Manual

Reset Configuration Data

Disabled Disable this function. ( Default value )
ESCD Clear PnP information in ESCD.
DMI Update Desktop Management Information data.
Both Clear PnP information in ESCD & update DMI data.

Resources Controlled by

Manual User can set the PnP resource (I/O Address, IRQ & DMA channels)
used by legacy ISA DEVICE.
Auto (ESCD) BIOS automatically use these PnP rescuers. ( Default value )
IRQ ( 3,4,5,7,9, 10,11,12,14,15 ),DMA( 0,1,3,5,6,7 ) assigned to
( Legacy ISA or "PCI/ISA PnP )
Legacy ISA The resource is used by Legacy ISA device.
PCI/ISA PnP The resource is used by PCI/ISA PnP device (PCI or ISA).
Reserved Memory Base
Disable the MEM. block using. ( Default value )
N/A
C800 ~ DC00 Select the MEM. block starting address.
PCI/VGA Palette Snoop
Enabled For having Video Card on ISA Bus and VGA Card on PCI Bus.
Disabled For VGA Card only. ( Default value )
64
BIOS Setup