Step 2 :
(If you want to use STR Function, please set jumper JP20 Closed.)
Step 3:
Power on the computer and as soon as memory counting starts, press <Del>. You will enter
BIOS Setup. Select the item "POWER MANAGEMENT SETUP", then select "ACPI Suspend
Type: S3 (Suspend to RAM)". Remember to save the settings by pressing "ESC" and choose
the "SAVE & EXIT SETUP" option.
Congratulation! You have completed the installation and now can use the STR function.
Suspend to RAM Installation
1
Pin No.
Definition
Open
STR Disabled(Default)
Close STR Enabled
32