Power On Function; Onboard Fdc Controller - Gigabyte 6WOZ7 User Manual

POWER ON Function

Password
Mouse Left
Mouse Right
BUTTON ONLY
Keyboard 98

Onboard FDC Controller

Enabled Enable onboard FDC port. ( Default value )
Disabled Disable onboard FDC port.
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address. ( Default value )
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8.
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
Onboard Serial Port 2
Auto BIOS will automatically setup the port 2 address. ( Default value )
3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8.
Disabled Disable onboard Serial port 2.
UART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR Onboard I/O chip supports ASKIR.
IrDA Onboard I/O chip supports IrDA.
Normal Onboard I/O chip supports Normal. ( Default value )
Enter from 1 to 5 characters to set the Keyboard Power On
Password.
Double click on PS/2 left bottom.
Double click on PS/2 right bottom.
If your keyboard have "POWER Key" button, you can press the key
to power on your system. ( Default value )
Windows 98 keyboard "Power" key.
52
BIOS Setup