Onboard Fdc Controller; Onboard Serial Port 1; Onboard Serial Port 2; Uart Mode Select - Gigabyte GA-8VT800 User Manual

FOnboard LAN Boot ROM *
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Disable this function. (Default Value)
8Disabled
Enable this function.
8Enabled

Onboard FDC Controller

Enabled Enable onboard FDC controller. (Default value)
Disabled Disable onboard FDC controller.

Onboard Serial Port 1

Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.

Onboard Serial Port 2

Auto BIOS will automatically setup the port 2 address.
3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8. (Default value)
3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8.
Disabled Disable onboard Serial port 2.

UART Mode Select

This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal Set onboard I/O chip UART to Normal Mode. (Default Value)
IrDA Set onboard I/O chip UART to IrDA Mode.
ASKIR Set onboard I/O chip UART to ASKIR Mode.
" * " FOR GA-8VT800-L Only.
- 41 - BIOS Setup