Table of Contents
Advertisement
www.ti.com
3.1.3 Sampling Frequency
Under the Windows Vista operating system, it is necessary to select a specific sampling frequency
because the sampling frequency cannot be changed on nearly all application software.
To set the DAC sampling frequency:
1. Open the Sound options from the Control Panel. (Start→Control Panel→Sound)
2. Open the speaker properties of the USB audio codec from the Sound options and select the Advanced
tab, as
Figure 3-5
3. Select the desired DAC sampling frequency from seven options: 8 kHz, 11.025 kHz,16 kHz, 22.5 kHz,
32 kHz, 44.1 kHz, and 48 kHz.
Figure 3-5. Speakers Properties—Advanced Tab (Windows Vista)
SBAU132 – March 2008
Submit Documentation Feedback
illustrates.
Basic Operating Set-Up—Windows Vista
Set-Up Guide
21
Advertisement
Table of Contents
