Volume And Mute Settings; Speakers Properties-Levels Tab (Windows Vista) - Texas Instruments DEM-PCM2912 EVM User Manual

www.ti.com

3.1.2 Volume and Mute Settings

Follow these steps to configure the volume settings for headphones, microphone, and the recording
options.
To set the headphone volume:
Step 1. Open the Sound options from the Control Panel. (Start→Control Panel→Sound)
Step 2. Open the speaker properties of the USB audio codec from the Sound options and select the
Levels tab, as
Step 3. Set the output volume, mute, and the balance for headphones from –76 dB to 0 dB.
To set the microphone sidetone:
Step 1. Open the Sound options from the Control Panel. (Start→Control Panel→Sound)
Step 2. Open the speaker properties of the USB audio codec from the Sound options and select the
Levels tab, as
Step 3. Set the volume and the mute levels for the microphone sidetone from –76 dB to 0 dB.
Figure 3-3. Speakers Properties—Levels Tab (Windows Vista)
SBAU132 – March 2008
Submit Documentation Feedback
Figure 3-3 illustrates.
Figure 3-3 illustrates.
Basic Operating Set-Up—Windows Vista
Set-Up Guide 19